How to Setup IPTV on Enigma 2 via Autoscript?

 is an open source software embedded on all the Linux based receivers such as VU+ or Dreambox. offers a lot of features including Auto-Bouquets, 7 Days EPG (Electronic Program ), Picons (Channel Icons).

Enigma 2 Autoscript

All older Vu+ hardware set-top boxes are MIPS-powered, newer are all ARM-powered and uses  image-based software as firmware. Its firmware is officially user-upgradable, since it is a Linux-based computer, as opposed to third-party “patching” of alternate receivers. Firmware is based on Enigma 2, which was originally designed for Dreambox by Dream Multimedia.

How to add IPTV channels to Enigma2 via autoscript

Step 1: Start by downloading the necessary items. DCC_E2 (Dreambox Control Center for Enigma2). You must connect to your Enigma using Dreambox Control Center E2 and click on “Telenet“. But first, you must find the IP address of your enigma2 . We will discuss this further ahead in this article.

How to Setup IPTV on Enigma 2 via Autoscript

Step 2: To connect, we need to know the IP address, , and password ( and password usually is root/root). Now about the IP, click Menu button on the remote controller. Go to Setting then Network Settings. You should see something like the below image:

How to Setup IPTV on Enigma 2 via Autoscript

Step 3: Once connected to your box via Dreambox Control Center, it`s time to execute the Autoscript command which should be provided by your IPTV provider. These scripts can be given in two versions:

  • – OE1.6 version which uses Python 2.6: It is advised to this version on non-Dreambox receivers.
  • – OE2.0 version which uses Python 2.7: It is advised to use this version on Dreambox receivers.

So for our Dreambox of this example the command line should be like this:

wget -O /etc/enigma2/ "" && chmod 777 /etc/enigma2/ && /etc/enigma2/

Copy/paste this command line on Telnet Terminal and hit enter.

How to Setup IPTV on Enigma 2 via Autoscript

Step 4: We suggest everyone to reboot the device once you execute the Autoscript command. To reboot the device just write “reboot” on Telnet terminal.

How to Setup IPTV on Enigma 2 via Autoscript

Step 5: After the Reboot, you will see on Bouquet list a new Group called “IPTV”.

How to Setup IPTV on Enigma 2 via Autoscript

Let us know in the comments section below about your opinion and feedback concerning this article. Thank you in advance.

error: Content is protected !!
Shopping cart